QM46-2 Delivery Issues

Discussion in 'Heidelberg Printing Presses' started by TrowaB, Aug 9, 2019.

  1. TrowaB

    TrowaB New Member

    Joined:
    Aug 2019
    Messages:
    2
    Location:
    Hutchinson KS
    I am having an issue where my delivery table is dropping too much and eventually the table drops below the joggers and paper goes everywhere. I have tried just cleaning off the sensor as best I can but that didnt seem to fix the issue. Any advice would be greatly appreciated.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:
    Will be a good idea:
    1) Adjustment the position switch S 20 see your schematic diagrams

    2) Adjustment the front +jogger

    3) Adjustmen lateral sheet jogger

    All in the delivery.
     
  3. realaqu

    realaqu Member

    Joined:
    Apr 2009
    Messages:
    54
    Location:
    Boston
    take off non-op side cover, next to worm gear there is a spring stop, it is too dirty, clean it and you are good to go
     
Loading...