KBA 104 display error Lock 1F

Discussion in 'KBA Printing Presses' started by Tommy, Aug 6, 2019.

  1. Tommy

    Tommy New Member

    Joined:
    Jul 2018
    Messages:
    4
    Location:
    Viet Nam
    Dear Team,
    My offset printing machine stop suddenly when the printing unit 4 active (use printing pressure of PU 4) . And then the ATC Fuse 1 A on board of PU 4 will break.
    I change new fuse and it still die.
    Now I change another one also but I don't use this printing unit then the machine run ok.

    As far as I know, it is regarding electric valve that control pneumatic cylinder of impression cylinder.
    So anyone know how to fix this error, please support me.
    Thanks and regards,
    Tommy.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    I did check my schematic diagrams, according is valve 119y5, look for winding ( can be in Short circuit) or mechanical problem, repair or replace.

    The best test is you disconnect only 1 wires from the board, put a new fuses,and you will see the fuses will be o.k.

    However if the fuse blown again, the problem is with the Electronic board( some components is in short circuit) need to repair or replace. Look for dry +cold solder joint.
     
  3. Vijay Singh Jakhar

    Vijay Singh Jakhar New Member

    Joined:
    Jan 2020
    Messages:
    1
    Location:
    India
    Dear Sir,
    A KBA offset press printing machine stop "F11 Trouble in computer of PU 2 or PU3 or PU4 or PU5 (Error Display) after shifted machine location to another location, Before it's working perfectly.
    So dear anyone know about this how to fix this error. Please help...

    Thanks with regards,
    vijay
    Email: vijsinjak@gmail.com
    WhatApp +91 9818899511
    KBA FAULT 2020-03-12.jpeg
     

  4. mahalingam

    mahalingam Member

    Joined:
    Mar 2015
    Messages:
    10
    Location:
    Sivakasi/TN/INDIA.
    Did you solve the problem sir?
     
Loading...