06-4201

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by peels, May 9, 2019.

  1. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,113
    Location:
    southeast iowa, usa
    my Igen4 started giving me 9-1100's out of nowhere... so. restart, clean everything... cleaner,etacs etc... wont pass 951. So restart again comes back with 06-4201. something to do with ROS?

    reboot full with power off... now i'm not getting the board status page... just "software initializing"

    next step?
     
  2. CargoPantsMan

    CargoPantsMan Senior Member

    Joined:
    Apr 2014
    Messages:
    142
    Location:
    Chicago
    According to my dusty notes that is a "ROS 1 (Magenta) Miscellaneous RCM Fault"
    Never had it happen on my 150, but it kinda sounds like something is going bad inside the ROS electronics.
    But if your board startup screen is not popping up it might just be a bad CRIM?

    Totally spit-balling on this.
     
  3. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,113
    Location:
    southeast iowa, usa
    ended up being full software reload

    again.

    lol