dc 242 white lines on all colours

FIXED!!!!!

Ok, after running 2500 black only prints through the machine yesterday and not seeing the problem once I decided that the problem was after the colour drums but before the black drum. I stripped the entire drum draw out and removed it, removed the black guard from under the black drum/dev unit - cleaned everything including all contacts for devs etc and then put it all back together. Ran a couple of test prints and its fine now. Now I have to strip it all out and put back the black drum guard and see if it is still clear.

Thanks to everyone who offered suggestions and stopped me buying unnecessary parts (xfer belt excluded)

##Black dev shield back in and the machine is still clear. not sure whats done it but its all working again.