starter for lamp on Ryobi 3304H

Discussion in 'Ryobi Printing Presses' started by ABerg3860, Jan 4, 2019.

  1. ABerg3860

    ABerg3860 Member

    Joined:
    May 2013
    Messages:
    36
    Location:
    Northwest Florida, USA
    Can anyone please tell me where the starter for the delivery lamp is located? I have replaced the lamp to no avail, and I know there should be a starter somewhere, but can't locate it.
    Thanks
     
  2. realaqu

    realaqu Member

    Joined:
    Apr 2009
    Messages:
    54
    Location:
    Boston
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:
    Happy New Year.
    As you must know there 2 types of Fluosrescent Lamp:

    1) Use the normal starter that you talking about. If the lamp use it, normally is near in the same structure or other in control box .

    2) Other fluorescent Lamp NOT use starter , since the Transformer has special winding inside for to produce always High voltage, and the way they work has Autotransformer.

    In short see it if you machine is using which one of the 2 types?
     
  4. ABerg3860

    ABerg3860 Member

    Joined:
    May 2013
    Messages:
    36
    Location:
    Northwest Florida, USA
    Thanks for the info, I will look into it.
     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Ok sir.
    Let me know.
     

  6. Diagramamen

    Diagramamen Member

    Joined:
    Apr 2016
    Messages:
    25
    Location:
    Brazil
    upload_2019-1-19_0-47-32.png
    I recommend you replace the fluorescent lamp (glass) with equivalent (plastic) LED bulb lamp. The installation is simple and will have numerous advantages.
    Check the supply voltage according to your needs.
    Your technician can guide you on this.
     
Loading...