Need Help! Komori sprint II 26 cam positioner parameter was cleared!

Discussion in 'Komori Printing Presses' started by Tuan Nguyen Hoang, Nov 7, 2018.

  1. Tuan Nguyen Hoang

    Tuan Nguyen Hoang Member

    Joined:
    Nov 2018
    Messages:
    6
    Location:
    vietnam
    Hi everyone,
    i have a Komori sprint II 26 japanese version!
    My problem is Cam positioner program was cleared and i don't have manual!
    Please help me to solve it
    Thanks you all!
     
  2. Tuan Nguyen Hoang

    Tuan Nguyen Hoang Member

    Joined:
    Nov 2018
    Messages:
    6
    Location:
    vietnam
    Thanks to CHOCK for your help sir!
    but my issue still not solve because cam follow timing is not included in this manual!
    have anybody got it? please share with me

    Thank in advance, sincerely

    PS: may i can send a little fees for it.
     
    Last edited: Nov 9, 2018
  3. Color Printing Forum Admin

    Color Printing Forum Admin Administrator

    Joined:
    Jul 2006
    Messages:
    315
    Just a quick note: welcome to the forum, but please don't get the forum into trouble by asking for or offering any service document which is either restricted from distribution or restricted by copyright.

    It's great to use the forum to ask and help answer specific questions and very much appreciated, but please don't use the forum to ask for or offer service manuals or any other documentation which would in any way violate a manufacturer's rights. Thanks for your understanding.
     
  4. Tuan Nguyen Hoang

    Tuan Nguyen Hoang Member

    Joined:
    Nov 2018
    Messages:
    6
    Location:
    vietnam
    I,m very sorry about it, thanks!
     
  5. Tuan Nguyen Hoang

    Tuan Nguyen Hoang Member

    Joined:
    Nov 2018
    Messages:
    6
    Location:
    vietnam
    Is there anyone else who can help me?
    Need CAM positions (VARICAM) data of KOMORI Sprint ii 26?

    Thank in advance!
     

    Attached Files:

    Last edited: Nov 13, 2018
  6. mcsongor

    mcsongor Member

    Joined:
    Oct 2014
    Messages:
    32
    Location:
    romania
    which model of Varicam you have?
     
  7. Tuan Nguyen Hoang

    Tuan Nguyen Hoang Member

    Joined:
    Nov 2018
    Messages:
    6
    Location:
    vietnam
    Hi Sir,
    Glad to have your feedback!
    on my printer varicam was replaced by omron 3f88l cam positioner
    and it works fine until the parameters are cleared by user.
    More about KOMORI printers:
    Sprint II 26
    I attached some pictures of the printer

    thank in advance!
     

    Attached Files:


  8. Tuan Nguyen Hoang

    Tuan Nguyen Hoang Member

    Joined:
    Nov 2018
    Messages:
    6
    Location:
    vietnam
    These are Varicam parameters of the Komori sprint ii 26!
    The cam position has been active again!
    But a new problem arises: the speed meter on the front panel indicates the zero and the feeder unit is not working.
    Can anyone suggest a way to check and fix this?

    thank you in advance!
     

    Attached Files:

Loading...