CP2000 Touch screen calibration

Hi,
got a small problem recently. the cp2000 display and the touch screen both have broken due to careless packing and transportation. So that I have replaced both. Now it's working but the touch panel is little bit out of calibration. But unfortunately I don't know how to calibrate the touch screen.

I have document which say to push a button on the filter card of the console to enable the "heidelberg" button. But it's not working. Is there any other way to do it? Any help is highly appreciated.

Thanks

 

hello sir,,
where is located bush button in cp2000? and what is mean by filter card??

 

Did you test the voltages +5VDC, 24v¿¿,since you say is not working.
do the test voltage

 

Everything is alright now.

 

How you calíbrate the touchscreen i have a similar problem. Thank you

 

Please share how you did this

 

You have 2 possible methods. Should work one or the other.

Method 1: press the heidelberg button on the filter card underneath together wit the machine stop button on the console simultaneously.

Method 2: press this combination (speed+) + (speed -) + paper feed buttons on the console simultaneously.

One of this should trigger the calibration.

Cheers.