Eyekom IV

Hi there. Currently running a Komori Lithrone 426 and our eyekom IV has gone wrong. Any ide where we can get one from?

 

First place I check for press parts is Ebay. Especially older, hard to get parts like Eyekoms. Make sure you check their feedback first! How about:
http://www.ebay.com/itm/NEW-Komori-...495?pt=LH_DefaultDomain_0&hash=item2565227ef7

 

Did you get your eyekom fixed or buy new? If you had it fixed, what was wrong with it?

 

Hello Eltitcho,
Most people on this forum are trying to help each other out. If you came up with a fix or a source, please share.
Thanks

 

I have a Komori L644 with the Eyekom IV on it. we recently had the unit burn up some resistors in the unit. replaced them. same problem. After purchasing a new unit for 6800 from Komori Parts, and having an electrician in, we found that the sensors have a bare wire and a covered wire. when the bare wires touched at the plug to the Eyekom unit, they would short out and burn up resistors. Fixed the problem with electrical tape to separate the wires. Komori Tech couldnt understand why they would engineer it this way.

 

Thank You for sharing…