Presstek DI cleaning device rubber replacement for sale

I had made for my presstek 52DI the rubber part on the cleaning device as it was in a bad condition and I couldn't purchase it seperatly from Presstek. I had to meet a minumum quantity to make the order and have a few extra. If anybody is interested in purchasing one let me know.
See photo attached.

 

Hi Vancibez,
I'm wonder if your bellows are working fine and what is your price for them.
Recently Presstek is offering refurbishing of those parts for less then 25% of the new part's price. So it's less then 500€ depending of the transport costs in both directions.

 

Hi Jan, yes really good news with presstek, technical support and parts have improved alot. We were considering selling the machine due to plate costs but now they have made us change our mind.

Regarding the rubber replacement, i just want to get back the investment, not interested in profit. I sell them for 45 eur each , shipping is extra. They work well very happy. Let me know

 

Hi Vanceibez, could you send me some pictures of your part. I'd risk and buy 2 pcs. for my customer. 45 € is excellent price comparing to the 500€ from Presstek, but they have to work as good as orginal.
Yes, Presstek has changed his policy and is now more friendly to their customers. I'm providing plates and parts for Presstek and QM DI presses.
If you need anything, just let me know I could offer you the best prices for parts (except the bellows)
My best regards
jan.rozek@gmx.at
Jan

 

hi well i not use more roll plate, so we used sheet plate with own clamp plate system patented and build with us, with a company from Italy. We can do better price to low cost sheet plate and reused plate to best value.

 

Hello,
Are you still selling a rubber part for a cleaning unit? I have KARAT 46 di.
Best regards, Gregor

 

yes, i still have some...let me know.

 

Hello,
I'm interested for 1 piece, Please, can you take a photo closer to the edge to make sure it is the same as with my KARAT 46 Di
my contact:
gregor@garb.si;
gregor.garb@gmail.com

Thank you, Gregor

 

sorry didnt see the messages on these.. if anybody still whats to try let me know . email me vance@vilasolutions.com

 

Hello Augustov,
Please share to me, if is posibile, details about company from Italy for such plate with clamp.
I want to change direction too for my DI press.
Thank you.

 

Can write directly to email heidelberg_qmdi@tech-center.com or add by WhatsApp+57 311 496 0404 for more information.