Xante Impressia gripper ?

Discussion in 'Xante Color Laser Printers' started by banjoman, Mar 15, 2018.

  1. banjoman

    banjoman Member

    Joined:
    Sep 2008
    Messages:
    57
    Location:
    North Carolina USA
    We have had our Impressia for about 2 months and it appears there is a 1/8th inch gripper ? Everything I print has to be adjusted up on the sheet 1/8th inch to get it in the center and on a duplex sheet I have to fix the file in InDesign or Acrobat because the iQueue imposition only adjusts 1 side and if I adjust the one side it moves the back side proportionally the other direction so if the 2 sides are off by 1/8th inch they will always be off the same no matter how far I move it? Anyone have a fix for this?

    Banjoman
     
  2. xfactor printing

    xfactor printing Senior Member

    Joined:
    Jan 2011
    Messages:
    647
    Location:
    united states
    It sounds like the sheet registration is off. Isn't there a way to calibrate/set the print margins through the setup?
     
  3. banjoman

    banjoman Member

    Joined:
    Sep 2008
    Messages:
    57
    Location:
    North Carolina USA
    There are 2 different set up procedures, one for the Impressia and one for iQueue. I needed to use the set up for iQueue to fix this. The Tech from Xante sent me instructions and now it is fixed. Also, there is no adjustment for anything over thick 2 or 3 on duplexing on the Impressia as far as centering the sheet. I've been doing those 2 passes, no big deal.
     
Loading...