Airtech powder system on QMDI-Classic

Discussion in 'DI Presses' started by Richard_Hardin, Jan 26, 2018.

  1. Steevo

    Steevo New Member

    Joined:
    Mar 2018
    Messages:
    2
    Location:
    USA
    That bounced. Is that the correct email address?

    advillarrealc@email.com
    host mx01.mail.com [74.208.5.22]
    SMTP error from remote mail server after RCPT TO:<advillarrealc@email.com>:
    550 Requested action not taken: mailbox unavailable

    Reporting-MTA: dns; filter03.reliabledns.org

    Action: failed
    Final-Recipient: rfc822;advillarrealc@email.com
    Status: 5.0.0
    Remote-MTA: dns; mx01.mail.com
    Diagnostic-Code: smtp; 550 Requested action not taken: mailbox unavailable
     
    Last edited: Mar 16, 2018
  2. augustov

    augustov Senior Member

    Joined:
    Aug 2011
    Messages:
    171
    Location:
    Colombia
    not is advillarrealc@gmail.com Gmail...
     

  3. jan

    jan Senior Member

    Joined:
    May 2009
    Messages:
    237
    Location:
    Austria & Poland
    Hi Richard,
    as Augustov has said: look for channal output 100, (SF 3+7, 15 than 100)
    100 OUT, SVK3:X31-1 Solenoid valve, powder spray device, Y32.
    You'll understand your problem. There is no controll of quantity of spray by the system, it's only on/off regualtion, due to the timing from the sheet's
    length controll. Reduction of spray quantity is made manualy by the knobs: left middle and right, and with the big one for common reduction.
    S04 is turning Y32 on and you see spray comming out.
    Due to the wrong sheet's length controll, you are probably getting only short impuls on Y32 (0 turn to 1) during printing.
    rgds
    Jan
     
Loading...