Roland 100-2 Mabeg

Discussion in 'Man Roland Printing Presses' started by Nikola Kolev, Nov 16, 2017.

  1. Nikola Kolev

    Nikola Kolev New Member

    Joined:
    Jul 2017
    Messages:
    3
    Location:
    Macedonia
    Hello my mabeg is not starting from the button....and we cannot print, can you tell me what is the real procedure..it was working few weeks ago.

    Roland 100-2 Mabeg

    Regards,
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir
    Please look for wires loose in the Button, open and see if there are loose wires, and tight, or dirty with oil, and clean
    with special Clean contact for electronics( see if the contacts are dirty or worn too) and replace or repair. See if there
    are voltage (see the schematic diagrams if are 220Vac for coil contactor or Solenoid)
    b) See the Solenoid for to connect the Feeder is loose wires, or loose Boltes, or the Iman is dirty, clean with special contact cleaner
    for electronic, and of course test if there are Voltage (see the schematic diagrams) with DMM.
    c) Test the fuse or c.breaker in the control box with DMM.
     
Loading...