Sakurai consol problems

Discussion in '4-Color Offset Presses +' started by Michael Horan, Oct 18, 2017.

  1. Michael Horan

    Michael Horan New Member

    Joined:
    Oct 2017
    Messages:
    1
    Location:
    Sydney
    Can any body help?
    My printing consol on a sakurai 575SD in not communicating with my ink ducts properly. It’s not indicating errors and with unit 3 plugged in all ink ducts are reading e6 which is a communication error.
    Thanks
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir
    Hope you are well.
    His problem with console, is lack of good contacts connector, please1) Tight all connector in the console Turn OFF, the panel, and see for dirty, loose, broken, or oil, or corrosion. 2) Reset all C.breaker inside of Console 3) Ther error e6 in unit 3 the type of disk is NOT o.k, when was formatted, the format Was incorrect , Try to select the indicate format for the machine 2DD/2HD. 4)Try to clean the Head for Disk or Floppy, with some special tool, like Clean disk, or another device available coming with the machine, or some computer store.
     
  3. Martin Adrian Albala

    Martin Adrian Albala New Member

    Joined:
    Aug 2021
    Messages:
    1
    Location:
    ARGENTINA
    Hello Chock , my name is Martin from Argentina. We have a Sakurai Oliver 2102 from 1997 and it ran out of battery and some lines of the program were deleted.
     

  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;
    The problem when you change the battery, only have aprox 10 minutes.

    The software is lost.

    The only way is to Reinstall again, and this only the factory or dealer the respectively software for to reinstanll , according with the model of machine +V of EPROM,etc.

    Sorry

    Blessing
     
Loading...