basic initialization method

Discussion in 'Heidelberg Printing Presses' started by raheel, Jun 11, 2017.

  1. raheel

    raheel New Member

    Joined:
    Jun 2017
    Messages:
    1
    Location:
    pakistan
    Any one please tell me basic initialization method of Heidelberg press
     
  2. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    827
    Location:
    KARACHI PAKISTAN
    What is the issue with your press?
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir :
    Here is attached the basic settings Heidelberg Press
    Use the selection menu to select the setting menus
    for various press functions.
    Select setting menu
    Press the Selection menu push-button.
    The selection menu appears (Fig.1).
    Note
    If a setting menu appears instead of the
    selection menu, press the Selection
    menu push-button again.
    Setting menu sheet arrival
    Setting menu suction air transfer drum
    Setting menu blower bar dampening system
    Setting menu pre-dampening/post-dampening
    Setting menu operating mode ink fountain roller
    Note
    Not all the symbols are shown and are
    dependent on the press equipment.
    0
    1 2 3
    4 5 6
    7 8 9
    Fig. 2 Numeric keypad
    To select a setting menu, press the number on the
    numeric keypad (Fig. 2) that is shown under the relevant
    symbol.
    The respective setting menu appears.
     

  4. exheidmech

    exheidmech Senior Member

    Joined:
    May 2009
    Messages:
    674
    Location:
    USA
    What are you trying to accomplish by this basic initialization? Usually, a basic initialization is performed on older machines with perfectors. Could this be what you mean? Not really a method of reinitializing a machine.
     
Loading...