Docucolor 550 nvm for fault code 042-346

Discussion in 'Xerox Color Laser Printers & Color Copiers' started by gonze1, Dec 10, 2016.

  1. gonze1

    gonze1 New Member

    Joined:
    Dec 2016
    Messages:
    3
    Location:
    United States
    Can anyone please tell me what is the nvm code for a xerox 550 with the same issue. Thank you
     
  2. lysyr

    lysyr Member

    Joined:
    Oct 2016
    Messages:
    11
    Location:
    Poland
    741-119 to 0.

    Before u change it, check the ibt sensors - one is on the edge and second is under belt,
     
  3. gonze1

    gonze1 New Member

    Joined:
    Dec 2016
    Messages:
    3
    Location:
    United States
    Thanks LYSYR, i was able to get about 1,000 + prints after your info, now i just continue to get the error again, i have cleaned both the sensors and also resitted the belt. NVM send up with code 3, what does 3 mean? Thank you
     
  4. gonze1

    gonze1 New Member

    Joined:
    Dec 2016
    Messages:
    3
    Location:
    United States
    Got it back working again, the ibt silver mark was dirty and might be what was causing the error code again. Its been working for about 2 hours now, please when possible let me know what status 3 means. Thank you
     

  5. lysyr

    lysyr Member

    Joined:
    Oct 2016
    Messages:
    11
    Location:
    Poland
    machine trying to set a belt in postion - 2 unsucessful and change nvm to 3. Replace belt or sticker and run belt learn in diag mode.
     
    Last edited: Dec 13, 2016
Loading...