Xerox DC 250 "Connection lost..."

Hi,
i´m new to this forum and have a question about a Xerox DC 250 with bustled Fiery X3ety.

I´d installed the machine in our second shop and after i closed the shop we moved the machine to our main business.
I called a friendly service technican and he told me to uninstall the Fiery from the machine for moving. (Thats what i did for moving)
Nothing more special...

Then i installed the DC250 in our main business and the machine won´t print complete sets.

First the machine printed 7 sheets (from a 90 pages book) then the message "CONNECTION LOST" is shown in the CWS 5.7.0.29.
I can see the start of the rip process (rotating gear) and the green bar the the connection message is shown.
At the moment the machine don´t print a single sheet.
Always lose the connection.

First to say... i use the same PC as in our other shop where the machine worked fine.

What i did till today
- installed the software again with all patches (also on a second HDD)
- changed the mainboard in the Fiery
- changed the graphic board in the Fiery

- changed the ESS board in the Xerox DC 250
- changed the Visual board in the Xerox DC 250

and at last
connected the machine direct to PC.

Nothing worked.

Anybody have an idea what i can do?

Thanx

 

maybe problem is with the fiery cable?

 

Hi,
we tried this on saturday. it didn´t worked.
Than we changed the processor on the fiery and the machine worked.

Problem solved. ;-)