How to replace cut line lamp/bulb on Triumph 4850-95?

Discussion in 'Cutters and Trimmers' started by Kampy, Sep 22, 2016.

  1. Kampy

    Kampy New Member

    Joined:
    Sep 2016
    Messages:
    3
    Location:
    Los Angeles
    Hi,

    We use a Triumph 4850-95 cutter, and the cut line light no longer lights up.

    I'm not very familiar with this machine, but trying to figure out if I can fix it myself, but not having much luck finding info... hoping it's a fairly simple fix, just replacing a bulb maybe?

    Anyone here familiar with this machine? Or can point me in the right direction to some resources online? I'd really appreciate it!
     
  2. Jeff

    Jeff Senior Member

    Joined:
    Jul 2006
    Messages:
    702
    Location:
    Michigan
    On our 4850-95 EP it was simple - there were two Festoon (?) bulbs under the cover. Unplug, remove a couple screws and lift off the top rectangular box off the blade area and there was access to pop in a new bulb.
     
  3. Kampy

    Kampy New Member

    Joined:
    Sep 2016
    Messages:
    3
    Location:
    Los Angeles
    Thanks Jeff, I'll give that a try... any advice on where to get replacement bulbs?
     
  4. Jeff

    Jeff Senior Member

    Joined:
    Jul 2006
    Messages:
    702
    Location:
    Michigan
    I actually never had to buy them -- when I got my cutter I got a box of spare bulbs with it and never had to buy bulbs - only went through a few. You should be able to google a source for them though.
     
  5. goalpdl

    goalpdl New Member

    Joined:
    Apr 2013
    Messages:
    3
    Location:
    Indianapolis
    Give Lloyds of Indiana a call 877-626-6848 and talk to Scott. He should be able to get them for you.
     

  6. Kampy

    Kampy New Member

    Joined:
    Sep 2016
    Messages:
    3
    Location:
    Los Angeles
    Thanks, appreciate the info!
     
Loading...