Heidelberg print master 46-2 grippers

Discussion in '1-Color and 2-Color Offset Presses' started by banjoman, Jun 9, 2016.

  1. banjoman

    banjoman Member

    Joined:
    Sep 2008
    Messages:
    57
    Location:
    North Carolina USA
    I need to know how hard it is to pull the impression cylinder gripper bar, doesn't look hard but figure I'd ask before regretting pulling it. I have a gripper finger screw stripped out and can't get it out.

    Banjoman
     
  2. banjoman

    banjoman Member

    Joined:
    Sep 2008
    Messages:
    57
    Location:
    North Carolina USA
    Never mind, I went ahead and pulled it, got the screw out and see some springs are in bad shape so I'll have to replace all of the grippers and springs.

    banjoman
     
  3. Swifty2

    Swifty2 Senior Member

    Joined:
    Mar 2013
    Messages:
    300
    Location:
    Ma.
    putting it back together is the trick.. how are you going to get it back in and set the timing with out the tool?????
     
Loading...