SM74 CPC 1-04 console, Flash card help.

We recently had a SM74 press installed. We did not get any formal training on the press but rather had a veteran pressman who use to run an MOF figure most things out. I work in the prepress department and have been tasked with getting a low end Cip workflow into place. That said I have put the files on the Linear Flash Card and given the card to the pressman who has not use the CPC 1-04 card reader before and does not know how to move the files from the card to the press and to use them. We have looked through the manual with no clear step by step procedure for how files are moved to and from the card and used. Does anyone know of step by step instructions we can get for doing this. Better yet a video would be great, but I will take whatever I can get. We did find pages in the manual showing diagrams but not clear step by steps. Any help would be great. Thanks Much.

 

After putting card into card reader, in job memory display, top row, from card (on left) (arrow coming out of card,) select job from position 1-50, & (on right) select internal job no. from 1 to 5 and enter on green button.
This then needs to be taken from the internal memory of 1.04 to the machine using the positioning button,select the job that was put in 1-5, put machine onto run and press the green button to confirm.

 

See the attached file, hope this helps.

 

This should do the trick, it had more detail the the documentation I had. Thank you so much for the help....