QMDI Plus Burning out of register

Discussion in 'DI Presses' started by RogerIV, Oct 21, 2015.

  1. RogerIV

    RogerIV Member

    Joined:
    Oct 2015
    Messages:
    17
    Location:
    Louisiana
    Hi,

    I have a QMDI Plus That after changing blankets now burns magenta roughly 1/2" late on the plate. How can I adjust? What would cause this?

    Thanks in advance I am new to DI.
     
  2. augustov

    augustov Senior Member

    Joined:
    Aug 2011
    Messages:
    171
    Location:
    Colombia
  3. augustov

    augustov Senior Member

    Joined:
    Aug 2011
    Messages:
    171
    Location:
    Colombia
    You can try to adjust first the blanket... be carefull with the packing.. and other you can tense a little more the blanket.. if necessary try to see if the register is was good.. compre this with a last job after the new jobs... i hope i can help you... if you wanna i can send picture of how you can move and adjust the register...
     
  4. RogerIV

    RogerIV Member

    Joined:
    Oct 2015
    Messages:
    17
    Location:
    Louisiana
    Thanks

    I appreciate any help you could provide.
     
  5. augustov

    augustov Senior Member

    Joined:
    Aug 2011
    Messages:
    171
    Location:
    Colombia
  6. RogerIV

    RogerIV Member

    Joined:
    Oct 2015
    Messages:
    17
    Location:
    Louisiana
    I have sent the email, Thanks again
     
  7. Paul Cavanaugh

    Paul Cavanaugh Senior Member

    Joined:
    Dec 2009
    Messages:
    630
    Location:
    Kennesaw, GA
    It sounds as if the blankets may be way overpacked. The thickness of the undercut on the cylinder is .091, you should pack the blanket to bearer height.
     
  8. RogerIV

    RogerIV Member

    Joined:
    Oct 2015
    Messages:
    17
    Location:
    Louisiana
    Thank You
     
  9. RogerIV

    RogerIV Member

    Joined:
    Oct 2015
    Messages:
    17
    Location:
    Louisiana
    Just an update, the plate take up gear was mis0installed and was allowing the plate material to pull during rotation.
     

  10. ahmedmaher74

    ahmedmaher74 Member

    Joined:
    Sep 2016
    Messages:
    36
    Location:
    United States
    Hi All
    Is there anyway to change registration without burning another plate? Meaning like heidelberg GTO machine .. can we move the plate Cylinder Forward or Backward to adjust registration.?
     
Loading...