dc 240 dead

Discussion in 'Xerox Digital Presses' started by almerico67, Feb 24, 2015.

  1. almerico67

    almerico67 New Member

    Joined:
    Feb 2015
    Messages:
    1
    Location:
    italy
    Hello to all, while updating the firmweare my DocuColor 240 went wrong and loads then it is not. The progress bar stops at the first steep and unique DAFT goes up and down. The DC240 does not start even so Gp 1 (special boot modes). I have the PWS and NVM diskette. How can I restore everything as an alternative? Thanks in advance. and sorry for my English.
     
  2. adriansto

    adriansto Senior Member

    Joined:
    Apr 2011
    Messages:
    141
    Location:
    somewhere in europe, near Black Sea
    What firmware version did you reload and how did you do that ?
     
  3. dino3m

    dino3m Member

    Joined:
    Nov 2013
    Messages:
    40
    Location:
    Australia
    Hi

    I know it sounds funny. try either booting up with the front door open or remove any options you have like finisher or HCF and boot up.

    hope this works
     
Loading...