Cp2000 - heidelberg

Discussion in 'Heidelberg Printing Presses' started by rasimzekaj, Oct 2, 2014.

  1. rasimzekaj

    rasimzekaj Member

    Joined:
    Sep 2013
    Messages:
    18
    Location:
    Tirana - Albania
    Hello ColorPrintingForum,

    I have a problem with my CP2000. My workstation won't boot.
    Here are some photos of the workstation.

    Can any one tell me what is the S3 switcher and what happens if we change it from 2 to 1 or from 1 to 2 ?

    [​IMG]

    This is what workstation is showing up at the monitor, does boot its related with the S3 switcher...

    [​IMG]

    Plase tell us if you have a solution in your mind for this problem. :D
     
  2. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    827
    Location:
    KARACHI PAKISTAN
    You will have to re-install the software or if you have a copy of windows NT, Try using it to repair the missing file.
    Better to call Heidelberg.
     
  3. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Oops, it seems the O.S (operating system) has got a problem as Asif said. You can switch to back up disc, but you should be aware that you have one defective hard disc on your unit.

    Goodluck
     
  4. rasimzekaj

    rasimzekaj Member

    Joined:
    Sep 2013
    Messages:
    18
    Location:
    Tirana - Albania
    Mathew thank you for the advice, can you tell me if i can copy the Hard Disc ?

    Best Regards
    Rasim Zekaj
     
  5. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    You can't take an image or make a copy of the hard disks by yourself. I advise to ask an engineer to fix it before you get another problem.
     
  6. aqazi81

    aqazi81 Senior Member

    Joined:
    Oct 2009
    Messages:
    827
    Location:
    KARACHI PAKISTAN
    It is possible to make an image of the hard drive but as advised by the Mathew, ask an engineer to do it for you.
     
  7. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    It is best to order a new hard drive as I believe windows NT comes preloaded on it and the service engineer only needs to install the press center software on it, I once tried to image an XP embedded hard disk but the process was unsuccessful. However as already advised you can switch over to backup disk and resume operation.
     

  8. Printerspartsusa

    Printerspartsusa Member

    Joined:
    Aug 2014
    Messages:
    14
    Location:
    USA
Loading...