Service Manuals for some older machines

send me your email

to my email:ercupa@netscape.net

superteto

 

HELLO..IS THE SORDZ THE EARLY TYPE WITH WEKO SHEET MONITOR OR TELDIX BOX..? I HAVE GOT MANY PARTS,OPS AND SERVICE REPAIR FOR HEIDELBERGS OLD AND NEWER ONES..REGARDS, PDPRINTUK. mcparts2008@googlemail.com

 

Dear sir
I am so glad to know you because i think you can help me to solve my problems . actually i need service manuals (pm check list) for SORSZ & CD102
thanks a lot

 

urgent

Hi guys
please somebody help me about print master/SORSZ & speed master/CD102
actually i need service manual (pm check list) in PDF file & operating manual.
thanks a lot

 

HI..I HAVE SORSZ(FOOTSTEP ON DELIVERY) INFO AND SM/CD102 INFO..WHAT YEAR CD102 IS THE PRESS? REGARDS,PDPRINTUK. mcparts2008@googlemail.com

 

HI EVERYONE..I AM IN THE PROCESS OF CONVERTING ALL SER/REP-MANUALS INTO PDF FORMAT FOR EASY VIEWING..HOPING TO SORT ALL IN TIME INCLUDING QM46/DI, GTO, MO, SORK/M/D/S, SM52/74/102, CD74/102, XL105 AND ALSO K-LINE, S-LETTERPRESS DIECUTTER(S/SB/SBG/SBB/SBD)..THE POLAR GUILLOTINE PROGRAM IS IN PDF FORMAT AND THE ROLAND PROGRAM(1993-99 and 2004+) IS TOO..REGARDS,PDPRINTUK..

 

Hi PDPRINTUK,

Would you be able to supply me with the following "SERVICE" manuals:

QM 46-4 DI Classic (1996 / 1997)

QM 46-1 Printmaster

QM 46-2 Quickmaster

Heidelberg Cylinder KSBA

Please let me know if you have these available in pdf format.

Many Thanks

Shawn

 

Isn't technology great guys! Especially when you've got guys like ercupa here, offering up free proprietary software for us to reference.

 

Hola, tengo problemas con una sm 72x102 año 89, tenes algun manual de error codes? el problema es electronico. gracias

 

We have available operators service manuals for PM-GTO-2, SOLNA525,Heidelberg SORDZ......Visit us on http://www.paperworldproducts.com/contact-us/ and write us an email for your requirement.

 

hi evry 1, can any 1 help me to get operating manual for Quickmaster 46 and even the service manual. Thanks.

 

Wiring diagrams for GTO 46

Hi Everyone,
I am new here on the forum.
We faced electrical issue wiht our gto 46 and we are not able to solve it as do not have wlectrical wiring diagram.

I wondering if someone could help me and provided pdf please...

Thanks in advance for help...

Have a nice day

 

Hi, exheidmech

What documents do you have for this machine Heidelberg SM 102 - 10 Color P6.
Please let us now.

 

I need to service the swing arm on our GTO 52.

Can anyone tell me where I can get hold of a Degree wheel, post for degree wheel, zero gauge?

Any info / diagrams you may have and are willing to share would be a great help

Thanks,
Peter

 

Heidelberg SBD 64x90 Manual

Hi All,
My Heidelberg has developed a timing issue between the Cylinder and takeoff chain grippers. Is there a manual or instruction sheet on how to correct this?
Thanks,
Joe Laskoski

 

What press model?

 

SBD 64x90 (?)

 

Hello..the sbd is the larger size s-letterpress/die-cutter model range with 2 chain grippers..send me a personal message as i may be able to help you..thank-you.

 

HELLO PETER..THIS IS QUITE I TRICKY JOB..TO DO THIS PROPERLY YOU NEED TO REMOVE AND CHECK/PRESET THE GRIPPER OFF THE MACHINE(TO THE FACTORY SETTINGS) BEFORE REFITTING AND FINE SETTING WITH A TIMING DISK.ALSO THE IMPRESSION CYLINDER GRIPPERS SHOULD BE CHECKED AND SET AT THE SAME TIME AS THE TIMINGS BETWEEN EACH SET OF GRIPPERS OPENING/CLOSING IS +/-1 degrees TOLERENCES SETTNGS. I AM NOT SAYING ITS IMPOSSIBLE BUT EXPERIENCE SAYS IT IS NOT SIMPLE! THANKS.. pressfixt@gmail.com

 

Hello MrFIXIT! Can't seem to find a way to send you a personal message. What am I missing here?

Joe L.

DUH! Never mind.