Dead 3302

Went to start up today and all was good for about 30 seconds, and then no power no lights no fan. I have 220 volts at the plug in, When i turn on main switch there is nothing,usually the fan would start. I checked the main switch and it has power when turned on. Is there a main fuse i'm missing?
any help would be appreciated.

Thanks
Don

 

if you have 220 coming into and out of the main switch the next thing in line for fan and florescent light is the transformer under the press towards the feeder but it sounds to me like you are not getting the 220 out of the main switch

 

Thanks Ryobiserviceman
I was checking for power with one of those buzzing light up probes, When i checked with a meter i was only getting 32 volts from one of the legs.
I borrowed a switch from another printers parts press and it did the trick.
Thanks again
Don