sf56 15-01 fault

Discussion in 'DI Presses' started by erictheprint, Jun 4, 2014.

  1. erictheprint

    erictheprint Member

    Joined:
    Dec 2009
    Messages:
    26
    Location:
    Eccleston Lancashire
    hi

    qmdi plus new installation checked all wires runs for 9 seconds at 3500 per hour then stops showing 15-01 fault for only a fraction of a second have changed BLT Board with an existing machine and its not that.

    when inching only revolves half a revolution with all guards shut and at 5500 per hour runs for approximately 17 seconds.

    pumps not kicking in when fault occurs

    Please find video at http://youtu.be/DYTTA3tmTa8

    any ideas ?

    regards

    eric hyde
     
  2. mrheidelberg

    mrheidelberg Senior Member

    Joined:
    Jan 2008
    Messages:
    761
    Location:
    United Kingdom
    are the delivery grippers hitting the bad sheet trip fingers
     
  3. Paul Cavanaugh

    Paul Cavanaugh Senior Member

    Joined:
    Dec 2009
    Messages:
    630
    Location:
    Kennesaw, GA
    It could be the TTK board instead of the BLT board. Or what MrHeidelberg pointed out.
     

  4. erictheprint

    erictheprint Member

    Joined:
    Dec 2009
    Messages:
    26
    Location:
    Eccleston Lancashire
    Thanks Paul and Mr Heidelberg

    Its not TTK or delivery grippers have tracked down to encoder. Changed the encoder made no difference put original encoder cable back and fault went so perhaps relates to positioning of encoder. Must have have dislodged when cables were being pulled through machine

    Many thanks Eric Hyde
     
Loading...