Ink and Water Synchronization point

my question is when i need to delay the transfer from high speed to low speed
on my water sync piont do i increase the #value or decrease the # value under
the sync piont settings.
This is on a Komori LS640

 

increase the #value to delay the transfer point, if I remember right it is a percentage of the top speed of the press.
We have Lithrone 428 I think it changes at about 5,000 IPH it is in the owners manual, it showed the way to figure
it out. hope this helps

 

Thanks for the help

 

The LS will not be ballanced before you reach arround 6000 sh/H

Do not try running under this speed or you will get color variations.
Then , the faster you go the stable you get...