image problem

Discussion in 'HP Indigo Digital Presses' started by jazzygwd, Nov 22, 2013.

  1. jazzygwd

    jazzygwd Member

    Joined:
    Oct 2012
    Messages:
    17
    Location:
    sw england
    show. Any ideas on how to solve will be great. Ive tried bid engagement calibrate and the bid is clean. Ink tanks cleaned as well. Nearly new pip and blanket. And youll only see it on solids and tints to that edge. Will try swapping bid over to cyan to see if moves but just seeing if anybody has had this issue before i swap the bid units over
     

    Attached Files:

  2. greg0535

    greg0535 Member

    Joined:
    Oct 2013
    Messages:
    25
    Location:
    dallas
    Have you checked your pip underlayer?
     
  3. jazzygwd

    jazzygwd Member

    Joined:
    Oct 2012
    Messages:
    17
    Location:
    sw england
    Thanks for your reply......the image you see is only happening on the black as seperation tests dont do this on any other colour. If it was underlayer wouldnt it be on all colours?
     
  4. greg0535

    greg0535 Member

    Joined:
    Oct 2013
    Messages:
    25
    Location:
    dallas
    It would probably also show up on magenta, but that's the only thing I can think of. Easy to check to. Try telling another color to print in the place of black in your job properties. See if the problem moves to that color.
     

  5. jazzygwd

    jazzygwd Member

    Joined:
    Oct 2012
    Messages:
    17
    Location:
    sw england
    Hi greg thanks for the ideas....I swapped black and cyan bids over and that cured the problem. Im sue the black bid does have an issue but while its not playing up in the cyan ill tackle it when it does
    come back.
     
Loading...