QMDI 46-4 Laser driver module

Hi !
My name is Thomas Rosén and i´m working in a printshop in Sweden were we have
two QM DI presses.
We have problems whith one of the laser driver boards
Error code LTMP1.
We have checked that the problem is on the board so if we change the board with another printing unit the error moves along with the board.
My question is:
Do you have info on what part of the board should be checked/replaced.
or do you have a wiring diagram of the board
You can reach me here or on mail
thomas@ivisby.se or thomasrosen@me.com

 

PLEASE FIRST TO READ THE WIRED DIAGRAM, PLEASE EXECUTE THIS OPERATION.... GO IN THE GUI INTERFACE, THE NORMAL MAIN SCREEN IN YOUR SCREEN PRESS, GO TO ¨S¨ ICON AND CLIC, LATER GO TO TOOL ICON WRENCH AND CLIC... LATER THIS TELL YOU BY PASSWORD, ENTER ¨DI¨ ONLY AND ENTER... OHH... I MUST REMENBER YOU NEED A KEYBOARD... OK... WELL YOU GO TO OTHER SCREEN... IN THIS HAVE 4 ICON SPECIAL FOR TOOL...





OK SELECT THE SECOND ICON FROM THE LEFT SIDE TO RIGTH... THIS MUST SHOW YOU A MENU.. SELECT ¨HDIAG¨.. THIS GO TO MSDOS SCREEN AND OPEN A SPECIAL PROG CALLED HDIAG... PLEASE DO CLIC IN ¨TEST MANAGER¨ AND WITH THE MOUSE SELECT UNIT ALL AND LATER ¨EXEC¨ AND WAIT FOR A TEST PERFORMER FOR THE LASER CARD, I HOPE THIS DONT SHOW A ERROR, BUT THIS TEST CAN SHOW ANY PROBLEM WITH THE CARD... DO THIS AN TELL AND THIS SHOW SOMETHING.. MY EMAIL FOR ANYE SUPPORT BY MESSENGER IS heidelberg_qmdi@tech-center.com, IF YOU WANNA I CAN HELP U WITH YOUR PROBLEM BY MESSENGER... I HOPE CAN YOU SOLVE YOUR PROBLEM...

 

If the problem moves with the board it is the board it needs to be replaced. If you need one let me know I try to give you the best price possible.
Anthony
WWW.QMDIPRESS.COM
DI Plates parts and service.

 

Hi Augusto.
I have mailed you the testwindow on the mailadress you gave me
Have you seen it?
Thomas Rosén

 

Hi Anthony!
I tried to mail you from the link on your website but it was rejected.
So please mail me a quote for a laser driver board to QMDI 46-4 plus.
Does one change a single board or are they supposed to be changed in pairs?
Thomas Rosén
thomas@ivisby.se

 

we sell laser driver modules guarantee and warranty.

 

i can supply a borad at the best price.... inbox me, i have a DI that i am willing to part out...