Ideal Triumph cutter error codes

Discussion in 'Cutters and Trimmers' started by Dawid, Dec 28, 2008.

  1. Dawid

    Dawid New Member

    Joined:
    Dec 2008
    Messages:
    1
    Can anyone be so kind as to post the meaning of common error codes that appear on the lcd of ideal triumph EP cutters?
     
  2. birdz

    birdz Member

    Joined:
    Dec 2008
    Messages:
    31
    Location:
    michigan
    I can't publish the list, let me know the error code and I'll let you know what it means. Include the model number
     
  3. ivan

    ivan New Member

    Joined:
    Jan 2009
    Messages:
    1
    Location:
    croatia
    Hy,
    I have problem with my IDEAL 4850 95 ep.
    Show me an error 15.
    What that means.
    Let me know please.
    Regard from Croatia.
    THNX,
    Ivan
     
  4. Jeff

    Jeff Senior Member

    Joined:
    Jul 2006
    Messages:
    702
    Location:
    Michigan
    Hi Birdz - I see you are in Michigan too. I have an MBM Ideal Triumph 4850-95 EP service number 4850 0492 -- for the past few days when turning the machine on and hitting the green start button to calibrate the back gauge I started getting an ert4 message in the lcd unless I wait 30+ seconds or so after turning the machine on to press start. I didn't get this before, so I'm wondering what it's telling me before it becomes a larger problem -- any ideas?
     
  5. xfactor printing

    xfactor printing Senior Member

    Joined:
    Jan 2011
    Messages:
    647
    Location:
    united states
    That is nothing to worry about. My MBM has done that for years if I hit start without giving it 3 seconds to " turn on " first.
     
  6. 1robe2

    1robe2 Previous User

    Joined:
    Apr 2014
    Messages:
    20
    Location:
    managua
    I have complete information

    reach me: ercupa@netscape.net
     
  7. TomA000

    TomA000 New Member

    Joined:
    Dec 2014
    Messages:
    1
    Location:
    Southern California
    EP 5550 ERT 04 error

    I would also like to find out more about ert 04 code on the Triumph EP 5550 cutter. I just replaced the A1 board, and the machine is running again. I am afraid to turn it off, though, not knowing for sure what all that ert 04 error code entails. (As a note to others, I salvaged what I thought was a blown A1 board by replacing the v1 diode. A tech tipped me off to this and with a little solder and a few cents of diode, I repaired a board that was going to cost me a few hundred.)
     
  8. RicohPrinter76

    RicohPrinter76 New Member

    Joined:
    Apr 2015
    Messages:
    2
    Location:
    KY
    I am trying to find out what causes a flashing error message on my Triumph Paper Cutter model 5551-06 EP. I came in and turned it on and it flashes error message t 15. I've never had an error message on this cutter before so I am wondering what it is. I'm guessing something electronic on it went bad.
     
  9. Pearl Teniuk

    Pearl Teniuk New Member

    Joined:
    Sep 2015
    Messages:
    1
    Location:
    Canada
    I have an Error Code on my Ideal 4850-95EP Paper Cutter

    The error code is ERT-15, what does this mean?
     
  10. RicohPrinter76

    RicohPrinter76 New Member

    Joined:
    Apr 2015
    Messages:
    2
    Location:
    KY
    I'd suggest contacting the company to find out what the error code is. That is what I ended up doing.
     
  11. paulmuts

    paulmuts New Member

    Joined:
    Oct 2019
    Messages:
    3
    Location:
    botswana
    Please help me with an EBa 480 it uses a small pcb, it is giving error 14 and wont go in diagnostics
    paul
     
  12. Jael Ramirez

    Jael Ramirez New Member

    Joined:
    Aug 2021
    Messages:
    4
    Location:
    mexico
    Hello colleagues, I hope you are well. I am with the problem that the triumph 9850 -95 ep cutter does not lower the paper press or the knife. when turning on the equipment it recognizes dimensions but when pressing the buttons it does not react. Do you think it could be a problem for the relays? how could i check them? thanks for your help
     
  13. Jael Ramirez

    Jael Ramirez New Member

    Joined:
    Aug 2021
    Messages:
    4
    Location:
    mexico
    Colleagues, I have a problem with a triumph 5552. It doesn't adjust the measurements well. Is there any way to adjust or reset?
    For example, if I want to cut an 11/17 at 8.5, it cuts it at 8.45. please help
     
  14. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    Follow this Steps:

    U: Measurement below 9,00cm.
    A: Press start until the backgauge has
    reached the position.

    U: Dimension was not approached correctly.
    -> LED "S" does not go off.
    A: - press START once again.
     
    Jael Ramirez likes this.
  15. esupic

    esupic Member

    Joined:
    Mar 2023
    Messages:
    8
    Location:
    Bugojno, Bosnia and Herzegowina
    Hi,
    Does anybody help with error 15 and error 17 for 5221-95 EP guillotine?

    Thanks
     

  16. szasz.csaba

    szasz.csaba New Member

    Joined:
    Jan 2024
    Messages:
    2
    Location:
    Timisoara
    Hello,
    If anybody still looking for the Error 15 code, its because of missing counter signal.
    In my case it was the weak motor, you can check by hitting it lightly with a screwdriver or something while pressing the start button, if it starts moving then there is the problem.
    Remove the motor and take off the top, clean the carbon brushes and all the black dust, I also used a light sandpaper to clean off the black stuff from the copper parts.
    Reassembly needs some patience but I just blocked the carbon brushes and springs with a piece of paper till I put everything together.
    Its good to go for another year at least till the brushes will be gone and then I just need a new motor.
    I hope this helps somebody while searching the internet like I did for weeks. (IDEAL 5560)

    IMG_5362.JPG
     
    Last edited: Jan 26, 2024
Loading...