GTO 4 WITH CP-TRONIC whater pan rollers problem

Discussion in 'Heidelberg Printing Presses' started by luc71, Jun 20, 2012.

  1. luc71

    luc71 New Member

    Joined:
    Sep 2010
    Messages:
    3
    Location:
    Romania, Brasov
    We have an GTOV(P) 89. The delivery slow downs,water pan rollers, and suction unit feeder are all suddenly not working. The press gives all indications that everything is functioning properly. Any and all help would be appreciated.

    Lucian.
     
  2. m_alatorre

    m_alatorre Senior Member

    Joined:
    Mar 2008
    Messages:
    66
    Location:
    Monterrey, Mexico
    Hi,

    We have a GTOZ 52 and one day just like that the water pan rollers stopped working. Turned out that it was a burnt fuze in the electric box(one that looks very similar to those used in home's electric box... at least they use them in mexico) i replaced it and continued working that same day.

    I remember being told that the fault you desrcibe would be caused by a faulty "Tachogenerator". Sounds like a time-travel device and have no idea what that does in the machine, but i know our GTO does have one and that the mechanic that comes here believes it causes that fault.

    Not much but hope it helps.

    Let us know how it turns out

    moe
     
  3. luc71

    luc71 New Member

    Joined:
    Sep 2010
    Messages:
    3
    Location:
    Romania, Brasov
    Thank you,
    I solved the problem. I think it was from the delivery slow down motor.
     
Loading...