Roland 306+lv 1997 120mm imp pros and cons

WE ARE LOOKING AT A roland 3o6 semi auto plate with rci and dahlgren
120mm imp need some input thanks

 

That would be a 306 PPL? The impression count is a little high but a thorough print test should give you peace of mind. If this is only RCI, check the keys on all units. If it is CCI, test the scanner on all 6 colours. We have been servicing these machines for the past 15 years. They are good machines when maintained properly. A bit tight to work from an operational stand point. All and all, most customers that have them would not trade.

 

thank you control this press also has a perfector and scanning densitomer alot of crap can go wrong. ran rolands for

years seemed like the ink consoles were always apain in the *** never ran this model mostly four color 40 perfector dont know if perfect is auto or semi or the old 13 step manual type .just looking thanks again .

 

This model has nothing to do with the older console you ran. Actually, the console is very good on the R300 and the perfector has taken a page from the Miller machines. Big differences, in a good way. But as I said, this is a precision tool and you need to take good care.
controlgraphicsusa.com

 

Roland products are specifically manufactured to deliver high quality performance. They uses eco sol inks which are environment friendly, odorless and water resistant.