Safe to use perf rule on Komori perfecting jackets?

Discussion in 'Komori Printing Presses' started by IGEN Jawa, Feb 13, 2012.

  1. IGEN Jawa

    IGEN Jawa Member

    Joined:
    Oct 2011
    Messages:
    16
    Location:
    Georgia
    I was wondering if anybody has any experience doing this and
    if it would or wouldn't damage the jacket.

    Thanks for your time...
     
  2. Lignum

    Lignum Member

    Joined:
    Oct 2009
    Messages:
    34
    Location:
    Cincinnati Ohio
    We have never tried it, the Komori demonstrator at the time the press was installed said not to try it, so we didn't.
     
  3. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    This will FINISH your jackets off , and they are costly.....
     
  4. IGEN Jawa

    IGEN Jawa Member

    Joined:
    Oct 2011
    Messages:
    16
    Location:
    Georgia
    Thanks, guys. I even went as far as contacting Komori, myself, and
    they recommend not doing it on the perfector jackets.

    Oh, well. Saves me the time of making up two sheets and gluing
    them down.
     

  5. david define

    david define Member

    Joined:
    Oct 2011
    Messages:
    16
    Location:
    Durban, South Africa
    just a piece of advise, we have found that to do scoring on the machine you have to add extra pressure on that particular unit. That in the long run will damage your impression bearing which is a very costly problem to sort out. rather use a die cutting machine if possible
     
Loading...