Man Roland? Miehle?

Does anyone run a Man Roland or Miehle press? Can we have a forum for us too?

 

I have a Miehle 25 and am learning lots about it, electrically & mechanically.

 

Anyone else?

We're getting new users every day on the forums here, so as soon as we get a few more running each we'll add the new forums.

Thanks for the suggestion!

 

We are running MAN Roland presses i our printshop. We have R202 TOB and Practica PR00. So if we can help each other we are glad.

 

I am running a 5/40 piggie back with coater.(rfk) I can help you with most problems.

Rod

 

I was running a 98 Man Roland 300 23 x 29 with after market UV coating. Also a 94 roland 300 with AQ coater..

 

Does anyone know the overall gross weight and the individual unit gross weight on a 1984 Miehle Roland 6 color 600 series printing press?

 

hi there I used to work for man roland uk and i have alot of info so if you need i will gladly help you

 

Can you give me the weight of each unit on a 1984 Miehle Roland 6 color 600 series printing press?

 

Hi there sorry i have looked through my 600 mechanical note book and they dont say the weight of the units but the R700 is 9ton per unit so I would say if you look at 10 ton you should be ok as the R900 is 14 ton per unit hope this helps you

 

Thank you for the response. Man-Roland tells me that each unit on a 600 series weighs about 6 tons. Overall weight on the machine is 35 tons. Thanks for your help.

 

A bit slow on the draw here, but a Man Roland forum now exists at http://www.colorprintingforum.com/man-roland-printing-press/
Thanks for the suggestion!

 

I run a 98 Man Roland 6-color 23x29 W/perfector (not using perfector)

 

The shop I work at has two Man Roland 700 presses. I work on an 8 color as a feeder operator. We also have a 6 color and a Roland UVer. I started out on the 600's.

 

I believe the total weight per unit on an 84 Miehle Roland is 17,500 lbs,and we do have an 84 Favorite 4/28 and two 60" super sixty both 6 color plus AQ