is your Canon clc 4000 down too often ?

Discussion in 'Canon Color Laser Printers & Color Copiers' started by gary delatush, Oct 15, 2007.

Tags:
  1. gary delatush

    gary delatush New Member

    Joined:
    Oct 2007
    Messages:
    3
    Location:
    west long branch new jersey usa
    We are fighting with Canon to be reimbursed for all down time usually about 6 hours each occurance from call to repair until finished . This is time that as a " print for pay " user I am charged for on my lease, and I am unable to print or generate any imcome while my machines are down. I AM ALSO TIRED OF PAYING FOR ALL UN USABLE CLICKS ON JOBS THAT DON'T BACK UP IN REGISTRATION AND ARE CROOKED AS A RESULT OF THE POOR FEEDER. WE ARE THINKING OF SUING CANON --- LET US KNOW IF YOU ARE HAVING THE SAME PROBLEMS BECAUSE A CLASS ACTION SUIT IS MORE EFFECTIVE THAN ONE INDIVIDUAL . THANKS PLEASE TELL OTHERS THAT MAY HAVE THE SAME PROBLEMS.
     
  2. xpquickprint

    xpquickprint Senior Member

    Joined:
    Mar 2007
    Messages:
    159
    With travel time, diagnosis, and parts acquisition, a 6-hour repair window doesn't seem unreasonable to me if unusable things are breaking; I'm not sure better can be achieved. Or are we talking about restarting developer or other routine every x-copies maintenance?

    Is your service through "canon business solutions"?

    And how crooked is the registration? (how many mm off is the image from one side to another, maximum?)
     
  3. gary delatush

    gary delatush New Member

    Joined:
    Oct 2007
    Messages:
    3
    Location:
    west long branch new jersey usa
    thanks for your response, but we have had over 85 service calls in the past year and a half, so I can't afford to be down for over 500 hours which is approximately 64 total 8 hour days without any production. As far as registration is concerned we have had prints 11 x 17 that are crooked by as much as 1/4 inch. After 30 years in the printing business I feel this is unacceptable. The other problem we have been having recently is a color variation as well as rain-bowing throughout the printed job. So I am not a happy camper
     
  4. Zaphod

    Zaphod Member

    Joined:
    Nov 2007
    Messages:
    7
    Location:
    Dayton Ohio
    Canon 5100

    We have had many many calls on our 5100. It's the same frame as the 4000, but faster.

    It seems pretty twitchy, and is down a lot. We don't have your feed problems, but we do have a lot of problems.

    1. It's like it has a bad spot on the back side of the engine that constantly thins out coverage. It happens fairly regularly, could be a regular maintenance item that is brought on by need for cleaning.

    2. It won't hold color for more than a few thousand sheets, sometimes a few hundred. It seems unreasonable to me for a production class machine to go in and out of color as fast and as far as it does. Why bother with ultra accurate calibration with a densitometer when you never know how long it will last? Pantone matching? Ha!

    3. Coated paper... Don't even get me started. Won't duplex text weights, very finicky about paper type in the R1 deck, wrinkles, flakes, or bakes. You can only print coated heavy from the big deck. Bypass has major deletion problems on Heavy card.

    4. Dusty, black and cyan for us, but reputedly a dusty engine since the 700 series from mid-90s.

    5. Haloing from text to solids, a weak point for many engines, Konica is even worse, but not a good attribute.

    6. 12x18 - It's a good thing we trim down all our 12x18 because the poor dear won't hold image on the outer 1/2 inch worth a dang.

    7. Drum areas are very touchy. We are constantly getting hairline deletions or full length fuzzy deletions.

    8. Error codes will lock you out and can persist for days or weeks while service techs scratch their heads.

    It's a good thing our contract was built to be a bridge plan to the ImagePress 7000 or I'd be after someones head. I'll be glad when we pack ours up to leave the shop.
     
  5. gary delatush

    gary delatush New Member

    Joined:
    Oct 2007
    Messages:
    3
    Location:
    west long branch new jersey usa
    souonds like our machine-- Canon is going to replace ours as part of our 100 % satisfaction guarantee but I am still getting names of other shops and information about their losses because we are entitled to be compensated for all of our down time.. Think about it it costs you about $15.00 per hour in lease payments for your machine that you have nothing to show for figure out what they owe you if you multiply $15.00 times as many hours as your have been down.. I have and I want the money refunded to me !!! Good Luck with your new 7000 and keep in touch maybe we can all get some money from them. Gary Delatush Boro Printing, west long branch , new jersey
     
  6. Craig

    Craig Member

    Joined:
    Nov 2007
    Messages:
    6
    Location:
    Ohio
    November 27th, thats when my CLC4000 leaves my shop for GOOD!

    After 2 years and 2 CLC4000's I have had enough headaches and downtime. I am getting a Xerox Docucolor 8000AP. I have had Canon regional service techs in my shop 4 times, and have had discussions with everyone up to and including Janet Cain who is Director & Assistant General Manager of Production and Imaging Systems group of Canon USA. All they do is agree on the problems and tell me to get an ImagePress 7000vp, NOT!!!!

    After 7 Canon products I will never buy another!

    As for your replacement, expect it to work OK for the first 250 - 300K after that it will tank out! I am now going through a set of fuser rollers a week, developer only last about 15K. I am pulling out the primary grids and cleaning them myself to get rid of the streaks, it's just a piece of JUNK!!!!!

    Good luck with the class action, but my advice to you is run to your Xerox dealer and see what they can do for you.

    Oh buy the way the ImagePress was only beta tested in 3 or 4 locations for 4 months, and one location ran the bulk of their black and white only on it! (free clicks) If I recall what I was told during a demo they only put 300 - 400K on them during the beta.
     
  7. Zaphod

    Zaphod Member

    Joined:
    Nov 2007
    Messages:
    7
    Location:
    Dayton Ohio
    Congrats on dumping your 4000

    Sounds like you've already decided on Xerox.
    Have you seen the 7000? Most of what I didn't like about our 5100 has been updated in the 7000. For another thread I think.
     
  8. Craig

    Craig Member

    Joined:
    Nov 2007
    Messages:
    6
    Location:
    Ohio
    I have demo'd the 7000 as well as had to run several jobs on it when my 4000 was down for a week. Not as impressed as the Xerox 8000AP.

    First of all it's too new for me, the 8000 has been out since 2004 and has had several upgrades since, second their track record with the 4000/5100 leaves a lot to be desired, they have made no attempt to solve any issues, what makes me think they will now?

    Just sour grapes maybe, but after 12 years and 7 machines I expected a little more.
     
  9. Dale Ziegler

    Dale Ziegler New Member

    Joined:
    Jul 2010
    Messages:
    1
    Location:
    South Louisiana, USA
    Gary...just came across your situation regarding downtime problems with CLC4000. Really interested in discussing direct...sounds like we have similar resons for looking for solutions....I really need help and as much information as possible
     
  10. Ray S

    Ray S New Member

    Joined:
    Aug 2010
    Messages:
    1
    Location:
    Hamilton, Ohio USA
    Dale

    In the same boat. Would like to discuss the situation with you also. Having nothing but problems with our clc 5100. I working on giving it back to Canon. Any info we can share may help us both. - Ray at Signature Custom Printing, Hamilton OH.
     

  11. Craig

    Craig Member

    Joined:
    Nov 2007
    Messages:
    6
    Location:
    Ohio
    Ray
    My advice is to try your best to dump it back onto Canon. They will admit to every issue with the CLC4000/5000/5100 series but offer no solutions other than throw parts into it which does nothing but prolong the pain. I was able to get Xerox to buy out my lease (it cost me a few $) and get a DC8000AP. Man am I happy with the performance, although a box of crayons was an upgrade the the CLC4000. If Canon (your dealer) won't work with you, start getting the other players, Xerox, Konica, Ricoh (though I have heard alot of negativity about their color box) and Kodak involved in a bidding war to get your business. But remember it's great to get a good price just make sure they can back up the service!
     
Loading...