However, my troubleshooting to resolve this fault has led to another problem for me. I swapped the ZSK of the SM74 with an SM 52 compact belonging...
Hi gentlemen. I really appreciate your suggestions that pointed me in the right direction. I have resolved the fault now. I took the 2 NTMs out...
I really appreciate your inputs. I will work on them as soon as possible and update you on the results.
It’s currently between 4.8 and 4.9volts.
It’s a 1998 Compact model with low pile.
I have had this problem on an SM102 before. What I did was that I unplugged the SSK connected to the printing pressure adjustment, unplugged the...
Hello Seniors, I am dealing with a difficult fault and I need your ideas please. I have been working on a 1998 SM 74-2-P Cptronic. The machine was...
Kudos to you. That’s it.
If your problem still exists, I would like to add this. Ensure that the delivery table limit switches are working correctly, especially the table...
There are two switches which one of them may be causing this fault. These switches control the automatic pile down of delivery table. b80 and b81....
Thanks
Hello gentlemen. The fault has been resolved, and I really appreciate your recommendations that made it possible. This is my findings. On the...
Okay. Thanks very much. I will get back to you on that soon.
You gentlemen are right. I checked for power(dc24v) at input 34 on 15FEM with reference to -1 and it was off. When I connect power from +1 to...