Recent content by wunmi-50

Hi Tate, Your problem is most likely from a wrong rotating field of mains voltage, that is anticlockwise power supply rotating field. So just interchange any two phases till your get the error eliminated. Your feedback will be appreciated.

Hi, You initially have two safety issues as per your first and posted SEK display, one in the feeder, which you somehow have now eliminated. Kindly avail the forum on how you achieved this. The remaining Error is related to your Central Control Console. So you have to check the safety related...

Hi Oliver. From the SEK screen you posted, it is clear you have safety issues in the Feeder and on the Cptronic console. So as soon as you post more pictures as you proposed, it may be clearer where exactly the problem is. Looking forward.

Okay thanks for your inputs. Will verify these and see the outcome.

Thanks for your response. It is appreciated. The machine number is as pictured below. Will surely appreciate any further inputs to resolve this fault from the forum. Regards.

Hi Guys, In furtherance to this fault, below are reference pictures on this machine fault. My observation is the machine seems to be held up by safety switch errors in the feeder but can't find relevant manuals showing the icons and black dots flashing in the pictures and videos. So will be...

Greetings. Have the strange Errors in pictures below showing up and press cannot operate. These are the compacts using the EWK and ZSK Technology. It equally is a puzzle that the errors though looks like feeder related icons, but are showing up under the main panel section. I can equally see...

Thank you all for your highly informative contributions to this post. As I posted earlier, the IPC carries MC 7 HDDs. Now for a press manufactured in year 2000, this obviously had been replaced and was done some 5years ago based on information at my disposal. Whether these lasted enough for one...

Hi Waqas, thanks for your positive insight. The problem has now been solved after switching the hard disk from the Master to the Slave. Machine is now back on production. So what can be done to the defective hard disk? Any possibility of repairs, reconditioning or replacement. Once again, I...

Hi Waqas, nice hearing from you and thanks for your response. The Rek2 uses Rgp5 while the IPC is MC 7, running on Windows XP. Machine made in year 2000. I can see the amber communication led on the IPC Ethernet port blinking, so definitely communicating. The transmitter led on the Rgp5 is...

The problem is I have Heidelberg display stucked on the sm74, cp2000 screen and the system does not load beyond that. The machine can however run but without the cp2000 cannot produce.Will be pleased and grateful to draw from your wealth of experience so as to know the possible causes and likely...

Dear All, We have a 2012 Speedmaster XL75 -4+L-C printing press displaying the Red Flag Error ''Safety and Variant Check Required''. We will therefore need the assistance of the Gurus on this forum to identify and solve the problem. Looking forward to your usually prompt responses. wunmi-50