ill bet there is already a post on this but i cant find it. i get an air bubble under the pip on long runs. is this due to lack of IO under the...
i asked this years ago. i was told there is no way to change the color. thats why yello is more expensive...
never tried it, but it seems like the problem might arise in defining the ink in the profiles. i dont know how much difference there is between...
paper is square, and the image on the paper isnt square on the sheet. the images dont back up front to back. it is consistent on all substrates....
i would bypass the pdu. an extension cord to the wall from the pc and monitor should get u running. if that works, im wondering if there is a...
wondering how to adjust the image skew. it is off about 1mm. i saw the adjustment in a wizard, but i dont know where the locking screws are....
it shouldnt move from its initial position. check first transfer and bid pressure ?
separation delay used to be null cycles. you can add a revolution or 2 before or after the 4 color print to accomodate the stretch of the...
From the drop down menu select problem handling, CE Applications, then tap the down arrow and scroll to the bottom, select shift registration...
you can change the color print order in the software, is that what you mean ? Job Properties > Separations>Ink (print?) order tab> select ink and...
the arm (cover) is the tile. yep clean with ipa.
wizard allows you to clean the ILD lens. the lens is under the 3rd door back on the exit conveyor inside the exit door
is the vcorn board on the 7000 in the press computer, or in the DFE ?
