I ran 18pt on my 1987 626 and i didnt do sh*t to the grippers or anything else.. didnt have any problem. Although dont take my advice on not doing...
I use to run a komori 26" 6 color and left the process ink on over night.. most of the time i forgot to spray it down with anti skin... Most...
Make sure you hit the "manual" button first before moving switch to wash up.. i spent the first few days moving the switch first and then hitting...
I was running wikoff brand of ink that i would leave on the rollers throughout the whole week and only wash up on fridays still leaving the ink...
im not fimilar with the 9870 or the multilith, but if your going to be doing alot of 4 color then get a press that has a side guide pull. I use to...
Is it only with that particular job that you experience this or with other job too? Try washing up after the first side and then start up again....
Use different ink! I use to run a roland that had the same problem on 60#... we tried everything before eventually switching ink, although it was...
lol no problem!
I dont know why, but whenever I think of the U.K., I picture small living spaces - houses extremely close to each other... I guess its because the...
LOL I've never evern seen snow in person! Although we are having some record lows (for florida) temperature here at the moment.
He said there are alot of vacuum suction on the cylinders that hold the sheet down from flapping since its a 40".. Sorry I dont have an email for...
he said your its most likely your grippers between unites 3 and 4 on the transfer cyclinder. If not, check your vacuum hoses. Hope that helps!
I worked on a roland 300 for awhile.. my first thought is to do what your already doing, checking the grippers. I know of a roland mechanic, but...
Had a larger sized press mechanic get stuck between units... me and another had to pull him out. Next time i saw him a couple months later, he had...
Its been a long time since I used a gretag, but you dont need to measure the paper each time prior to using it unless you switch paper stock from...
