Thanks for your support! The machine is fixed. Cause is that the positioning data of section roller motor is false.
You mean that handterminal or cd-rom?
Could you explain more details? How to do it
After doing the makeready, the machine show errors of inking. I check it by handterminal and there is no error.
Please help me to solve this error. There are only 2 green lights. Inching mode is ok but normal mode isnt ok
Firstly, Check all wires that plug in uwr from bkf drive. Secondly, compare all led signal on press stations. If they have diference you can swap...
Thank you. I solve it. The machine is working
Yes, it is. Asim shezad help me to solve it. Cause is that relais board of +BC station was broken. I have to pay 4 months for finding error.
When I put off sub contact compostion of K050, P00=07 and then control panel has green light. After that, when I push start button first time,...
When I turn on main aptomat, P00 = 07 and Relay K2A of relay board (A358/18) absorb. However, when K050 pull in, K2A release (power out) and error...
Terminal 19 has high singal. When main contactor pulls in, bit 2.4 (sps a354/03) has green led. When main contactor release, bit 2.4 has no...
My machine can not start. Main contactor pulls in a half of second , then it releases and time clock show 08 (07 to 08 to 07 to 08 in a second)....