hi ...i have problem with folding machine .it is not run ..when i switch on appear error please help me
it Alcolor damps ...
HI have the same problem GTO Z. My operator running the machine and suddenly stop .can anyone help me
anyone can help me.....i want to bypass air sensor for sm-74 can anyone tell me how i can do it
it is semi ....
Hi sir. I changed the zsk2 board. It is working normally; everything is ok but when we want to change from straight to perfecting, it gives error...
Can u explain how initialization
Hi sir: I changed zsk2,zrm and kid boards.then i turn the machine on .the system booting.the Mid on feeder working normal but in display show...
it show heidelberg
yes sir
in this number board
hi sir when i bout Put bridges on zsk2 and turn on the board work normally zsk2 and ewk1 and ewk2 ....all board is work....but the board in the...
i tested the power supply X3 are 5.3 volt and 24.5 volt and x90 is 5.3 volt the volts is normal or not....please tell me ......i cleaned all...
this im my model
HI sir : i have machine SM74...the GKM board in x6 the volt is 137v .......the ZSK2 led after 15 second turn to green and red...the EWK1 AND EWK2...