Recent content by SAICPRINT

Thanks Junker

Heidelberg said this is the direct successor, but I don't think it's going to work, does anyone have a source for this part?

Yes, I suspect the coil is bad since everything functions when you manually push d5 in, I am trying to locate a replacement right now. I will attach a pic of the part I need.

One question can anyone tell me what the D5 contactor's function is? If the handle is set on run and I manually "push in" D5 the press starts to run.

GTO year 1981, Stopped press to do registration, when I went to start the press it does not go on Run. Checked all the safety guards, double sheet detector, crank handle, delivery stop etc, all functioning properly. Press will inch back and forward. At the time the press was inked up, so I...

It looks like from the photo you posted that your color is not consistent form sheet to sheet. The density in the magenta is stronger in some sheets then others, for example. I have had this same problem lately, and have tried different inks but no luck. My ink rollers looks like they need...

The valve pointed out in the pic was "clogged", (always open) so compressor wouldn't shut off so the sensors are ok, called Stan at Intermountain Press service he gave me the sf to turn it on and off and cleared right out. Also gave me instruction to take apart and clean. Problem solved.

In the picture just to the left of the pencil (silver box with two springs showing).

Heidelberg PM 46-2 year 2001 Having Problem with Pressure tank Although all press functions are working and the pressure tank is full, the compressor will not shut off. I opened the side panel and checked for leaks didn't find any but air is coming out of this air fitting pictured. I have the...

There are four knobs in front of feeder, operators side, one is suction, air, pile height, the one on the bottom left is sheet arrival. Turn off your double sheet detector and run paper through the press (off impression), and make sure your pile height, air, sheet arrival are set correctly. Just...

Are you getting early or late sheet warning on the console? Adjust the sheet arrival knob - clockwise sheet arrives earlier, anti clockwise sheet-sheet arrives later.

I haven't changed the impression jacket, With dial indicator on 0 I get a slight drag with .35mm feel gauge, not tight...

Here are two pics one is black at 50% tint fm screening next one is cmy fm screening.