https://www.facebook.com/share/p/1Ewo762Xse/?mibextid=wwXIfr [ATTACH]
We have rewound quite a few over the years but make sure you replace all o rings as it’s the hydraulic oil running out of the plug breaks down the...
[ATTACH]
Error can sometimes be misleading … I think your find the inverter for the backguage motor is faulty or brake is not releasing so supply failed or...
One thing worth checking when you run a reference run it does ask you to confirm the size once it’s calibrated sometimes that’s in centimetres but...
Have you just opened a new program and save a dimension say 300:00 and press the mark key Sometimes it just needs to be entered not erased to...
Polar 78 has it own lifting point on the top of the machine under the screw on top cover It just rolls up and you can use a gantry with a block...
Remove the front cover to find switch and bracket on the frame above electrical box Or find the plug on rear panel and follow cable Might have...
Sometimes the micro switch plastic carrier breaks and the switch sits on top of the electrical box
Polar Infrared light guard carry’s out a test on power up, if correct D1/4 and D5/6 will show intensity and alignment. D5/6 only shows test...
I was working on a cp2 and kc2 yesterday evening.. I have access to a test rigs to try various panels , cps software and displays. Always looking...
Well done
We make our own replacement update. Also one advantage relays can be replaced in the future.
