Just wanted to thank you again for the guidance .... the NVM locations that had to be changed to 50 were 746-939 and 746-940. I'm assuming these...
Thanks so much for your assistance. I changed the positions to 50 from 100 but the problem is still there. If you can think of any other solutions...
Thank you for your reply. Is moving the lines all the way back something you could explain more? Not sure how to do that. Thanks again.
Hi, We're having an issue with our xerox 700 ... most prints have a thin black lines on the edge of the long side of 8.5 x 11. Not sure why as...
Thanks for your help ... used the code but now I get a new error message: 010-319 Any idea what the NVM # would be?
Hi, I know this error code is for fuser overheating .... already replaced it with a new one. Just not sure how to reset the NVM ... anyone knows...
Hello again, I'm on the lookout for some xerox 700 toners at a good price. I do have a few extra 242 toners and wondered if I could refill my...
The toner is fine... have used it before with no issues. It seems that the new copier has a NVM setting "sold" instead of "metered". I just don't...
Hey, Thanks to your info I was able to determine that our machine's NVM 762-902 is set to 3 instead of 512 and 762-904 is set to 2 instead of 3....
Hello, we have purchased a used xerox doc 700 and after running it (without any issues), we got an error message 093-937 after replacing the cyan...
Thank you so much for your input ... will check the toner chute and hope it will solve the problem. Any idea how I could find what each error code...
