Recent content by Pressfix

  1. Communication error on komori lithrone 428 year, 2003 model

    Goodday all, thanks for the information on the communication error on the Lithron 28, the communication error is gone, but I can't still print because the ink ductor on the control panels on all unit not coming on when printing and also on the PQC it's not coming on. All other things comes up...

  2. Komori Sprint Impression off problem

    What year is your komori Sprint, from what you have done,if u re right with the eye com setting and all sensors are clean then u can look at the fault from the air supply to the valves. because if it's an older machine and the impression uses air control for the impression then u can check if...

  3. Communication error on komori lithrone 428 year, 2003 model

    Thanks for the reply, still need more information on the communication error on the lithrone 428, and the ink distribution not coming up on all the units. I would appreciate if anyone has the normal data the com pot setting, also the setting for the customer network for the lithrone 428 2003...

  4. Communication error on komori lithrone 428 year, 2003 model

    Please can anyone help with a solution to the communication error on lithrone 428. The machine was newly installed and was tested printed after the installation, we have all functions working fine, but the machine was coming from France, so we decided to change the language by re-installing KMS...
See more
Back
Top