Thank you very much Rolandguy and Controlgraphics. Yes I want it. petarhh@gmail.com . Appreciate your help.
It's 2 color perfecting press and I need to know how to set the rollers correctly, because we have problems with 2nd unit and all of our manuals...
Hello! Is it possible somebody to send me an operating manual for Roland 700 - year 1996?
Meny, it's not an insult, it's your job to convince people to buy your machines. In most of the printing companies there is no time to keep the...
Meny, This is salesman trick. KhS-AI, CIP3 these are all very useful tools, but on a rel jobs you can forget about 20-30 sheets per make ready....
Contact Komori and they will send you new rollers
They are not level. I explain in some of the previous posts what happens when i level them -the keys are NOT closed even if I turn them to the...
I checked all the keys and everything seems fine. The keys are turned exactly 3/4 from the end. Do you have any other suggestions. Appreciate your...
Thanks for the advice Exheidmech, I will try it. And one more question, should I level the keys (from the little screws on the back of the keys)...
I don't think the problem is in the motors, but i will try it just to be sure. I think the problem is in the position of the whole key. Maybe the...
No fault messages on the cpc. Zero point of the motors is OK. The problem is in the position of the key. See the mark on the picture.
I have a big problem with 25 keys on one of my units. Keys 2,3,4,5,6,7,8 work perfect the others not, the problem is that they don't open enough....
Try to reset only the Main Motor not entire press
