Recent content by Parth

  1. Intermediate roller in water supply on plate is not being used

    In my Heidelberg SM 72 i was having issues with ink water balance. The mechanic suggested that the pan roller and other water roller are old so you should remove intermediate roller and use like this Now i have purchased new rollers but still i have not put intermediate rollers Now when my ink...

  2. Colour variation problem in SM 72vp

    Thank you for the information. There is no fixed solution to the problem but ya it can be minimized by appropriate settings and experience.

  3. Require Drawing of SM 72 Plate Punch Die

    HELLO FREINDS I require SM 72 plate punch drawing or diagram so that I can get it made. Please anyone with available drawing may share pdf or jpg or any other available format. I want drawing in which there is placement of eyeholes as well as plate clamps i.e. 4 holes. Anyone having this...

  4. Colour variation problem in SM 72vp

    Dear Freinds, I manufacture mono cartons on 300 gsm fbb. we often face problems of colour variation. in every start of a printing run first 100 sheets are of different color and rest are of disfferent color. please tell me how ca i control that.

  5. Buying SM72 or SM74

    Thankyou Everyone for the replies. i am going for a machine inspection of sm72 529no. Cpc 1.02 cptronic Please tell what things should I inspect and ensure and What kind of jobs or testing shall I do. Currently the machine is running in a prinshop

  6. Required Six color with coater for printing and coating

    Size 72 or 74 Curing lamps if possible. Location india

  7. Buying SM72 or SM74

    I am from India. Here old machines from Europe usa are imported and the whole container is delivered us. We just receive a photo of machine before buying all it depends on luck for the condition of Machine. Can you tell me how can I procure a machine in India in more legitimate eay

  8. Buying SM72 or SM74

    I am searching sm 72 or sm 74 for my factory. I manufacture mono cartons which are printed on upto 350gsm of board. Some are suggesting buy sm 72 because of built quality and registeration. Some are suggesting buy sm 74 because of faster make ready time. I am searching for models up to 1996...

  9. How do I Match color from my coreldraw file on cmyk printed sheet with a two colour offset machine.

    My clients order want some specific colours. There jobs are cmyk.I have two colour machine. When we print we cannot see the final colours. How do I ensure that final result will match with coreldraw colours.
See more
Back
Top