Sm74-5 ink zone motors,lateral/circomfrential motors(uniti to unit5) does not move. ABOVE MACHINE, SM74-5-P3, SER.#:622929, 1998 MODEL WITH CPC...
does the machine have sheet calibration facility? if it does, then use it to calibrate the sheet.
Send the prices
many thanks to you mathew, i will try it.
THANKS A LOT WUNMI FOR UR CONCERN. THE CONDITION ON THE MACHINE IS THAT ON THE MID DISPLAY, BOTH ON THE FEEDER AND THE DELIVERY, THE MACHINE...
THANKS MATHEW, YOU ARE CORRECT, BUT I HAVE CHECKED ALL LVT's, REMOVED AND RE-INSERTED THE ESK, INCLUDING THE NTK POWER BOARDS. THE BACK PLANE...
THE MECHANIC CHANGED SOME PNEUMATIC HOSES FROM FEEDER TO DELIVERY, INCLUDING UNIT 1 TO UNIT 5 DUE TO MANY LEAKAGES. AT THE END OF THESE...
THESE GUYS HAVE TOLD YOU THE RIGHT THING TO DO, YOU HAVE TO REPLACE THE BATTERY(PART No:020220), IT'S A 3.6v dc BATTERY. IF THE PROBLEM STILL...
Display screen does not come "on", mach.typ:stahl kd 66,bcuh 66,Prod.#:1224425431 A CARELESS MACHINE OPERATOR DROPPED A HEAVY LOAD ON MAINS...
check switch s.sb, make sure the switches (sensors) are properly positioned. Check s.sb- cu9, check supply voltages to the switches (plug44),...
Does your machine come with VARIANT CODE? OR can you upload the current picture of the VARIANT CODE page from the CPtronic of the machine? Also...
HELLO SHAWN, WHAT YOU NEED WILL NOT BE POSSIBLE BECAUSE OF COPY RIGHT LAW, BUT IF YOU HAVE ANY PROBLEM WITH QM46-4 DI PRO, OR QM46-2...