I too had a similar problem with the same year press (2007). Found that the sheet did not like any air behind it in the delivery. Move rear row of...
Had these problems myself once; spent 2 hours tearing my hair out. The problem was with a similar UM Board to what you are running. What happened...
I had the same problem a while ago. On the console under the CP2000 screen, the entire board lifts up and under there at the very back is a...
Yellow always last colour - will set skin tones. Cyan and Magenta can be swapped around to suit trapping; i.e. if you have a cyan solid and a...
We find the Bottcher product excellent; but when we have run it for its three minutes, rather than washing up with chemical, we fill a wash up...
Hi PeterH, The delivery pile in our 74 wobbles like that also; only when the pile is high, like over half of the delivery full. I solve this by...
I don't know what size it is, but holds about 125 ml- sorry about the lack of info, but it was supplied with the press from new.
Your supplier should have an anti foaming agent, these work well. You could also try a mix of 70 / 30 IPA and water added to the aqueous when...
Hey DWF, So you are saying you place a metal clip on the end, then an end rubber, then another metal clip, sounds good, I'll try that when I set...
Hi mr heidelberg and tc rex, thanks for the replies. Well this has been a mission. Yes, it turned out the end rubbers were the culprit. We got...
Try Foil Inks; we use them for printing onto foil stock for beer labels. takes about 20 hours to dry, but dries rock hard.
Calcium build up ?. Maybe you need to de calcify the rollers - We find Magenta is always the first to go. If not that then take the rollers out...
Hi, Running a 2007 model Speedmaster CD74 6 colour plus coating Tresu chamber blade system. Lately we have been having major problems with the...
Are you running Aqueous coating and IR drying on your CD ?. If you are only running IR, ramp everything up to 100%, manually turn the switches on...