The best solution I've found is when you have the plate in the hopper ready to go on, get some baby powder and trickle it down the plate.The...
Yes.every time both mechanical detector and electronic. The manual says either put a single sheet in the lays or set it when sheets are going...
Hi I've got a problem with the electronic double sheet detector when running 80g offset.Even when it's set it will let doubles and triples through...
Wow, I've never heard of that before, but if that works il definitely try it.Next time 80gsm offset is on. Thanks for your input
Uncoated, SRA2. We recently had the feeder clutch rebuilt, every other stock runs great.doesnt matter where the sheet separators are or position...
Hi, does any one know how to speed up the response on the register. When a unit is selected to move in any given direction the response is very...
Does anyone have a sure fire way of printing 80gsm offset at speed? All other stocks are ok. I've tried so many ways with sheet separators/ Air...
Does anyone have a sure fire way of printing 80gsm offset at speed, every other stock is fine. I've tried so many ways with sheet separators/ air/...
Make sure form roller oscillators are turned off and that the form rollers are not moving in the journal, if they are pack them out with litho...
Both long and short anything over 128gsm it marks on the back edge, it mainly seems to come from between the black snd cyan units, there's only a...
Hi, The R300 that I'm new to has serious marking problem mainly on the tail edge when printing anything over 170gsm.All the transfers are spotless...