Recent content by Nicky G.

Hi, can anyone explain to me how to adjust the print centering with respect to the sheet and on both sides? 1. If I make the first X, Y adjustment, do I adjust the offset based on the correct front? 2. If I make the second adjustment for both sides, how does it work? Is the X, Y offset the same...

@OkiTech The vertical stripes are caused 100% by the scratched fuse film and the damaged pressure roller. The horizontal stripes present on all 4 colors instead that do not give a nice full and compact toner coverage of the full background, what could have been caused by? I suppose from the...

hi @OkiTech Yes the fuser needs to be changed, I bought the printer used a month ago and I'm understanding the things to replace and the print quality problems. What can you tell me about points 2,3,3a,4?

@OkiTech I start by specifying that I have the Fuser that has the pressure roller cut and the fuse film scratched (as shown in the photo). 1. The drums do not appear to be scratched 2. Looking at the CMYK prints, apart from the lines on the fuser film sleeve, those horizontal streaks and the...

@OkiTech Take into consideration what I wrote in (update 2) and leave aside what I wrote previously. Can it be the cause of Electromagnetic Interference?

[UPDATE 2 - I think the definitive one] Positioning the Printer temporarily for tests it was close (I would say a few centimeters) to 1 LCD TV, 1 FIRESTICK, 1 POWERLINE (to connect the printer to the lan). In your opinion, is it possible that these devices created an electromagnetic field that...

[UPDATE 2 - I think the definitive one] Positioning the Printer temporarily for tests it was close (I would say a few centimeters) to 1 LCD TV, 1 FIRESTICK, 1 POWERLINE (to connect the printer to the lan). In your opinion, is it possible that these devices created an electromagnetic field that...

[UPDATE 2 - I think the definitive one] Positioning the Printer temporarily for tests it was close (I would say a few centimeters) to 1 LCD TV, 1 FIRESTICK, 1 POWERLINE (to connect the printer to the lan). In your opinion, is it possible that these devices created an electromagnetic field that...

I have an OKI ES9431 with 4 Trays (3+1). When I use the OKI Postscript Driver to print I can select trays 1-4 and print from them. When I use the Efi Fiery C9Server Driver (which prints better than the normal driver) I can only select tray 1 (it doesn't detect the 3 additional trays) and in any...

a question: @riseandshine how does the printer mark the toner levels? Let me explain: MAX: 100% / MIN: 0% now when the toner level drops it is marked 99%,98,97,96..... or in increments of 5 / 10%? 100 / 95 /90 /85 ... 100 / 90 / 80 /70 /60% ... ???

[UPDATES] Hello to all friends of the forum, Yesterday again the problem with the ES9431, which I solved again (for now).. Searching online I did not find solutions, but a clue... But could it be a firmware problem????? Thinking about it, I installed the firmware updated to April 2024 v1.62_0_4...